The Ugly Truth About Outlaw Effect's Dead Man's Hand

A little while ago, I wrote a post about Outlaw Effects. Turns out I got some of the details wrong. This led the guys over at Outlaw to politely respond. Turns out they are from Canada and not France, so I guess these guys are more into hockey and beer than... French... stuff. These guys are more likely to say "aye" than "ooh la la" than I previously thought. When the guys were setting me straight I figured I'd slip in a request to try out some of their pedals, which goes to show you what can happen if you just ask because they actually said yes. Let's take a look at the Dead Man's Hand from Outlaw Effects.

Standard micro pedal setup. I've already spent a good deal of time describing the physical pedals here, so now we will mostly look at the sounds this makes. I spent a lot of time with this pedal. I used it as my primary OD on my pedalboard for a set I played a few days ago. It kicked my East River Drive by EHX. I played my 72 reissue Telecaster through my board and into a Fender tube 1x12 amplifier. I found it to be very usable. Most sounds that the ERD made the Dead Man's Hand can follow while taking less than half the real estate. If space and weight are an issue, and when is it not, then the Dead Man's Hand is a great pick. Also consider that the Outlaw's OD is less expensive than the EHX's pedal and you have a real competitive product. In practice, the Dead Man's Hand was able to serve just as well as my main Tube Screamer clone. But how does in stack up against other Tube Screamers head-to-head?

TS Shootout:

Above is a picture of the competitors. From left to right: Digitech Bad Monkey, Outlaw's Dead Man's Hand, a 1985 vintage Ibanez TS-9, and Electro Harmonics' East River Drive.

Round 1: DMH vs ERD

On paper, these two stack up quite well. Both have true bypass, bright LED, heavy duty switches, nice sturdy metal cases, and comparable prices. When played they are very similar as well. They are both chock full of the classic tube screamer type sound. Warm, gritty, tube-like break up at home with lead and rhythm roles. Both pedals matched each others' sounds. This is until I flipped the switch. My assumption was that the switch was there to flatten the mid-hump. It does a lot more. It acts almost like a frequency boost for the highs and lows. There is a big difference in the output when put into the "Aces" mode. The level is boosted as well as the lows. In fact, the biggest notable difference was with the bass. The lows were much more prominent. The ERD left the bottom end behind when the tone knob was cranked. When in "Eights" mode, so does the DMH. But when put into the "Aces" mode, this pedal reaches a territory that the ERD couldn't follow.

Round 2: DMH vs Bad Monkey

The Bad Money is a pedal that many hold in high regard, and yet others dismiss at a cheap copy of a tube screamer that doesn't stack up. I would mostly be in the second camp. This is actually one of the first pedals that I ever bought. It was inexpensive enough for me to afford, and sounded like something I could use. Love it or hate it, this pedal actually stacks up with the other in this list. The biggest noticeable difference with the Bad Monkey is that instead of a tone knob, it has adjustable highs and lows. Set at 12 o'clock the DMH is much more transparent, but with adjustment (lows at 2 o'clock and highs nearly pegged) the Bad Monkey was brought close enough that I had to try hard to hear the difference between the two. Needless to say that there was a lot of territory that the Bad Monkey couldn't explore like the DMH.

Round 3: DMH vs Vintage TS-9

So, it's time to bring out the big guns. Many collectors and modders hold the vintage pedals as a bench mark, something to shoot for. That's why no test is complete without putting the real deal beside the up and comer. Again, both pedals went blow for blow, producing very similar sounds at nearly the same settings. With everything dimed, the TS-9 had a little more high end and transparency. But the same problem was present with the lows. The bottom end just wasn't there anymore. It's the same story with the DMH until you hit the toggle.

The Conclusion

The Dead Man's Hand is a great pedal from Outlaw Effects. I have stated some of my dislikes about how the pedal is put together, but for the sound this pedal is an amazing value. Great Tube Screamer like tone at a fraction of the cost and space, plus the added benefit of a useful boost feature. Don't dismiss this pedal for its affordable price, it easily stacks up to anything in its class.

What Order Do Effect Pedals Go In?

I've asked myself this question so many times, and over the years I'm become inclined to set up a pedal board in certain ways to create particular sounds. There are some general rules to follow or completely ignore, whatever your case may be.

1. Volume.

Volume pedals are very handy tool in a guitarist's bag. It allows you to adjust your volume on the fly, mute your signal for tuning or guitar changes, boost you signal (provided that you running less than full volume) and create swell effects. Personally I like my volume pedals first. Why? Because it create to same effect as the volume knob on your guitar. If your volume runs into you overdrive/distortion then you can manipulate to distortion by changing your volume (ie you'll have a cleaner sound with lower volumes). If this is not the effect you desire then I suggest running the volume after the distortion. This will allow you to change the volume of your signal without changing the distortion level.

2. Wha

I know that this is not typically the wha pedal would fall, but Its where I put it. A wha will manipulate certain frequencies in your signal, mostly the lower-mids to the upper-mids. Your main concern with wha pedals is the voicing and pronunciation of the effect. I've played enough in bedrooms and stages to know that there are huge differences in how the sound is received. I've sat in a bedroom and thought that my digitech rp100 muti-effect pedal sounds great, but when I used it live it sounded like I was playing out of a tin can. ( by the way, never mess with multi-effects. just say no kids. Learn from my mistakes) What you will notice between have your wah before and after your dirt boxes is the presence of the effect. For the most part, the OD and Distortion will want to change your signal frequencies just like the knobs on your amp. The "tone" knob of your Overdrive with play with how your wah opperates. (given that it is on while your using your wha) A wha before the dirt will be less noticeable (more organic sounding). While a wha post dirt will take your whole signal for a ride. This may be what you want. I like a mellow wha, but sometimes you need to be out in front of the sound and make that effect stand out.

3. Dirt

There are many different ways to get your dirty signal, but if your using a stomp box, this is where I put it. Having your Volume and Wha before these pedal gives you more control over the entire sound. I like control. Maybe thats why I have so many choices when it comes to my Dirt Boxes. I have a lot to say about OD/Distortion but you can catch most of it if your follow that link there.

4. EQ  (and other signal processors)

Again, this isn't exactly would you should do, but this is how I like it. Remember how I said I like to control my tone? Well, this is a little part of that. I use my EQ as more of a boost. I set it up to give me a little mid-hump action and maybe a overall volume boost. Some people like to set their EQ and forget it, just let it do its thing for your tone. That's fine, but everything is trying to change your frequencies. If you run a Compressor or Noise Gate of some sort, here is where I would put them as well. Be aware that your Compressor and Volume pedal are not going to play well with each other. Basically, they are doing the exact opposite of each other. If you want comp on your signal and swells. then you have to run your volume after the comp.

5. Delay

I had a Boss DD-3 that absolutely hated be overwhelmed by a distortion. Other than that particular Combo, delay is best left near the end of the chain. I'm not a big delay user. I will use it from time to time to fatten up my sound, but for the most part I like a nice straight sound.

6. Filters

I don't mess with delay much, and I use filters less. In theory, filters behave better at the end of the chain. That way they can have their way with your sound and change it as they see fit. If you are a fan of these then have at it.


So there you have it. I encourage anyone interested in effect to play with them as much as your can. There really is no wrong way to set your rig up and I may be doing it all wrong as far as you are concerned. If you disagree with any of this then leave me a comment below. If you want to see what else I have to say about all things musical then subscribe. Let me know someone reads this mess!

Bad Monkey Mod

As far as I can tell the only modding that is really done to this pedal is switching out some capacitors for higher or lower value to effect the tone. I'm totally new at the whole modding ball game but this is what I've found out so far.

If you remove the Capacitor at C5 and replace it with one rated at .1uf then you can flatten the EQ of the pedal. Cutting the mid will give the pedal a transparent sound. If you want to cut the mids even more you can use a Cap with a rating of .15uf.

I pointed out the C5 Cap. It was a little of a wheres waldo. It is right between the knobs and the input jack.

Her are the solder points for C5. Not that hard to find, but its worth pointing out. Just under the knobs there.

There is also a mod for more bass. I'm not sure that this one is as popular as the mid-cut but I'll show it anyways in case you may want to add some bass to you Bad Monkey. Basicly you just follow the same routine. In this case you are changing the Cap at C11 with (again) a .1uf (or .15uf if you like) Cap and then you have bass boost. So Much Bass...

Pictures!

This one is much easier to find. Its basic the lowest thing on the right side.

Flip it over and there you go. The solder points. Pretty easy to find this time.

I haven't actually done this yet, but this is a common mod. You see this mod in the Humphrey Audio "badder monkey" on ebay for 100+ dollars. I bought mine a number of years ago for 40 From Musicians Friend. I't been kicked off the Pedal board because I don't need another "green" style OD when I have my Visual Sound Rout 66. But I may do the mod and use it for a boost or just as another color OD.

Like mods? Try one of these: Boss GE-7, Boss BD-2, Boss TR-2